I know this has been asked before but I can't find it in the archives. What are the measurements on the bottom of the shift lever where it fit in the rail slots. I have one that is very sloppy and needs to be built back up. Thanks Larry
 
on 3/27/12 in the archives it shows a drawing and everything. Used this for my tractor and worked perfect
Listed under super H shifter problems
 
3/4" fore and aft, 0.30" or so athwartships, and
0.43" down from the neck down to the bottom side of the 3/4" part. Imagine somebody will post the picture, but I can"t figure how to do it.
 
SHIFTER.jpg
 
Need to do that that job too. What welding rod is recomended for building up the shifter?
Thanks, Joe
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top