Do you know where I can get an Alternator Bracket for SuperA

GRAPE-DRANK · Jun 6, 2012

I want to make the switch. I don't want to make, I just want to buy one real quick. Do you know where I can get one with all the hardware?

Anonymous-0 · Jun 6, 2012

Just use the generator bracket. Thats what i did with my B. If you use the old style GM alt you might have grind a little where the bolt goes thru the bottom of the alt to square up the belt.

mkirsch · Jun 7, 2012

The stock generator bracket works fine. All you need is some 3/8" threaded rod, a few nuts, and lock washers.

You have to drill out the bracket holes to 3/8" for the threaded rod, and I think you might have to mount the bracket upside-down on the tractor.

rustyfarmall · Jun 7, 2012

(quoted from post at 18:30:03 06/06/12) I want to make the switch. I don't want to make, I just want to buy one real quick. Do you know where I can get one with all the hardware?

Go to your favorite, local auto parts store and ask for a universal alternator mounting bracket.

I will also mention that you may spend as much time getting that universal bracket into the correct configuration as you would adapting the original generator bracket.

Do you know where I can get an Alternator Bracket for SuperA

GRAPE-DRANK

Member

Anonymous-0

Well-known Member

mkirsch

Well-known Member

rustyfarmall

Well-known Member

Similar threads