H pto seal

Anonymous-0 · Jun 5, 2012

I got national no. 3214 from the archives, The shaft size is correct but the OD is too small. Any ideas for the correct no.??

CNKS · Jun 5, 2012

The place you got the seal from can cross the IH number to National, SKF, etc. If no parts book the IH number can be found on caseih.com.

D Slater · Jun 5, 2012

If its the last type pto made I have used national seal # 473214 for the output shaft.

roy prins · Jun 5, 2012

i used a napa seal and it leaked , so i put in another one right behind it-- stacked-em so to speak-- i have seen some old seals that were double only they were one piece-- if you need a napa no. let me know--

Jason the Red · Jun 5, 2012

You can cross reference the Case IH part number on NAPAs website. I puchased mine there last fall with no problems.

H pto seal

Anonymous-0

Well-known Member

CNKS

Well-known Member

D Slater

Well-known Member

roy prins

Well-known Member

Jason the Red

Member

Similar threads