tire pressure

jfrankhash · Jun 4, 2012

I have a Farmall A that will be used with a woods belly mower to cut my grass. What pressure should I put in the rear tires? Thanks, John

Paul Shuler · Jun 4, 2012

I mow with a cub and an H. I run some where between 10 and 12 psi in the rears. Anything more and they ride to dang harsh. The fronts I run around 30psi but it seems like the dang thorns around my place always adjust that down to 0

erik dekeyser · Jun 4, 2012

Do you have fluid in the tires? If you do it will ruin the tire gage. If there is fluid in there i just put air in it until you see the lugs on the bottom of the tire lift a little of the cement. That works for me or put 12 pounds in.

Phil Tibbetts · Jun 4, 2012

I've had the same problem with locust trees around here. Now I put the Green Slime in them and no more problems.

Jim Becker · Jun 4, 2012

(quoted from post at 17:57:09 06/04/12) Do you have fluid in the tires? If you do it will ruin the tire gage.

Spring for an air-water gauge.

tire pressure

jfrankhash

Member

Paul Shuler

Member

erik dekeyser

Member

Phil Tibbetts

Well-known Member

Jim Becker

Well-known Member

Similar threads