Hole in Water Jacket Cover Plate

WI Dave

Member
I'm still working on cleaning up my H for paint, and my latest issue is that after wire-wheeling the rust off of the water jacket cover plate, I noticed there's a pinhole in it. Can it be patched, or should I find a replacement cover plate?
 
Well as long as the metal around that pin hole has not gotten so bad as to not be thick enough to work with yes it can probably be brazed up or maybe welded up or even J-B weld may work
 
(quoted from post at 09:39:22 05/30/12) I'm still working on cleaning up my H for paint, and my latest issue is that after wire-wheeling the rust off of the water jacket cover plate, I noticed there's a pinhole in it. Can it be patched, or should I find a replacement cover plate?

Replace it. If there is a pinhole in one place, the entire cover is thin and compromised.

New covers are available from a variety of sources, but be careful, as they are NOT all created equally.
 
Yea,for the price of a new one,I would be leary to re use one in bad shape that needed repaired.

It is only a matter of time before it rust thru again. ;)
 
(quoted from post at 18:18:11 05/30/12)
Replace it. If there is a pinhole in one place, the entire cover is thin and compromised.

And once he removes it and sees how rotten and scaly it looks from the inside, replacement is a no-brainer. Sometimes the baffles are about gone.

AG
 
Replace it. I didn't find the two pinholes in mine until after paint was done and I was ready to crank it up the first time...
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top