hey guys.. more progress, getting things really moving!!!
Link to 125+ photos & story.... http://colby560.shutterfly.com/
OK... so my lower 2 radiator mounts were shot and like many they won't come out. So what we did was removed rubber & cut the orginal square into quarter, then shined it up with wire wheel & welded the little bit to screw head. They came right out!!!
We also, made a cut in the frame so we could remove the structure that holds the fuel tank.... it's off to sand blast & primed. It will be painted red off the tractor.
Tires are nearly new, and will be mounted on original rear rims that were powder coated silver along with all mounting hardware!
Hood bolts (new kit I purchased) & front wheel bolts are off to get chromed don't want them to rust, ever [/url]
Link to 125+ photos & story.... http://colby560.shutterfly.com/
OK... so my lower 2 radiator mounts were shot and like many they won't come out. So what we did was removed rubber & cut the orginal square into quarter, then shined it up with wire wheel & welded the little bit to screw head. They came right out!!!
We also, made a cut in the frame so we could remove the structure that holds the fuel tank.... it's off to sand blast & primed. It will be painted red off the tractor.
Tires are nearly new, and will be mounted on original rear rims that were powder coated silver along with all mounting hardware!
Hood bolts (new kit I purchased) & front wheel bolts are off to get chromed don't want them to rust, ever [/url]