SH air pipe

Dean Olson · May 18, 2012

I'm starting a restoration of a 54 SH.

I need the air pipe from the oil bath cleaner to carb.

Do any of the other models, M,SM,300,350, use the same part?

So far I haven't found a new one. Any body reproducing them?

Thanks in advance.

Bob M · May 18, 2012

Dean - AFIK the Super H air inlet tube is unique to that tractor. The air tubes from the H, 300, 350, M, will not interchange.

Would think however a good muffler shop could custom bend a piece of exhaust tubing into what you need.

rustyfarmall · May 19, 2012

(quoted from post at 20:01:27 05/18/12) Dean - AFIK the Super H air inlet tube is unique to that tractor. The air tubes from the H, 300, 350, M, will not interchange.

Would think however a good muffler shop could custom bend a piece of exhaust tubing into what you need.

Yes, a muffler shop can bend up a new one for you. I needed one for a Super H a few years ago, and took a pipe from an H along with me to be used as a pattern for the bends, but had them make it out of the correct diameter stock for a Super H.

SH air pipe

Dean Olson

Well-known Member

Bob M

Well-known Member

rustyfarmall

Well-known Member

Similar threads