IH 1066 Harmonic Balancer spun

IHMANKY · May 10, 2012

Can't seem to locate anything of it on the CaseIH parts site. Anyone know what the run? I'm figuring about $400 but don't know. How hard will that booger be to get off of there? What do I have to take off to get it off? I'm thinking a good six-point socket with a breaker bar should get the three bolts out, but is the thing going to seem "welded" to the crank where it spun? What's my easiest, best removal trick?

the tractor vet · May 10, 2012

The puller . and as for price i have not bought one in a long time so i ain't gonna even try a guess.

TMatt · May 10, 2012

Just changed the balancer on our 1086 before we started planting. If I remember right it was around $450. I used a puller that I got from Advance Auto Part through their loaner program. It was a pretty hard pull, but it did eventually come off. Had to work the whole way, never really got easy until it was off the shaft. We were able to get it off with the radiator in place, just pulled the hoods, side panels, fan, pulley and shroud out of the way. One other thing that I picked up from a forum was to get a new key when you get the balancer from IH. They have revised it so that it's longer and will make lining up the new one easier. Hope this helps.

4020deereboy · May 11, 2012

Abeline machine has em for 275.00

Kevin B from Illinois · May 11, 2012

Just changed my oil pump on my 1486 the pulley came off pretty easy with the correct puller, good time to change the front seal also if its leaking at all.

IH 1066 Harmonic Balancer spun

IHMANKY

Member

the tractor vet

Well-known Member

TMatt

Member

4020deereboy

Member

Kevin B from Illinois

Member

Similar threads