cast rear hubs for 766

kennell · May 7, 2012

I have one rear hub on my 766 that wobbles. It appears to have been cast crooked. I wondered what tractors other than the 7 and 966 would have the same cast hubs? Thanks Kent

mkirsch · May 7, 2012

Are you SURE it's the hub?

Installers are not always that careful when replacing the rims, and don't tighten the lugs evenly all the way around. That makes the tire wobble.

You should be able to take the wobble out by loosening, then re-torquing the lugs that hold the rim in place. Use a gauge block to judge whether the rim is running true.

mkirsch · May 7, 2012

Sorry, forgot to say:

Pretty much any 7, 8, 9, or 10-series "large frame" tractor uses those hubs.

Do you have 34" or 38" hubs?
Do you have clamp type, or wedge-locks? (Your picture looks like clamp type, which would not be normal on a 966 AFAIK).

cast rear hubs for 766

kennell

Member

mkirsch

Well-known Member

mkirsch

Well-known Member

Similar threads