(800) 853-2651
SHOP NOW

B Head on Super C

As per a catalog I have here it says the 2 heads are different as in it has 2 different numbers for the heads B having one number and the Super C another number
 
I'm not positive, but I think it will.

Gene Bender on here will know for sure.

You will have to use the water outlet from the B, the one from the Super C is a different diameter and a different angle.

You may also need to use a Super C head gasket too, not sure.
 
It will bolt on but the compression chamber in the head mite be different. Put the two side by side and compare as they did change the design of the heads in the compression area. Bolt holes will be the same and the gasket will work if you have newer stepped pistons make sure they have clearence for the piston. If the C has flat top pistone there wont be any problem. You can set the head on the engine and use some modeling clay then turn the engine over and check the clay.
 
The water neck will be a problem but the water pump is mounted down on the block for the SC and will not be an issue. Why can't the original B head be reconditioned and put back so all these issues can be avoided?
 
Yes, it will bolt on. But the water outlet is a larger diameter and comes out of the head at a different angle than a "B" water outlet because a Super C radiator is taller than one from and A, B, or C. Not sure, but I think a straight "C" water outlet may work, I haven't tried one.

I tried to put a Super C water outlet on a B one time and learned that they are different.

BTW, I still have an extra Super C water outlet, because I couldn't use it.
 
You must log in or register to reply here.

Similar threads

H
Farmall Super C
Replies
2
Views
392
rustred
rustred
M
Super C Carb Identification
Replies
4
Views
274
mainer76
M
C
Super C input shaft seal replacement
Replies
1
Views
131
Charlie M
C
R
Super C disc brakes
Replies
11
Views
387
Levi81
L
C
Wiring lights on a Super C
Replies
6
Views
280
560Dennis
560Dennis
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top