suggestion on rebuild kit

MF165farmer · May 6, 2012

Well I about got my H motor tore all the way down I was wondering what were some of the rebuild kits some of yall have put in them An what might be the best

gene bender · May 6, 2012

Your best place will be Abilene Tractor Parts. In frame and out of frame are available.

rustyfarmall · May 6, 2012

There are only one or two manufacturers of engine kits, and several hundred different retailers. The kits marketed by Tisco are probably as good as it gets. Know what size bearing inserts you need prior to ordering.

M Nut · May 6, 2012

I've been buying mine online from SE(South East)Tractor parts. Most reasonable priced I have found and after purchasing several, I have no complaints. 1 even went into my log skidder which has since gotten some pretty good workouts. No problems.

David G · May 6, 2012

I would put the firecrater pistons in.

El Toro · May 6, 2012

Have your crankshaft measured for wear at your local auto machine shop. They won't grind it undersize unless it needs it. It may need polishing. Buy your bearings from the machine shop. They also have sleeve kits here on this forum. Hal

teddy52food · May 6, 2012

Why not use those from this site?

mikeintn · May 6, 2012

Pay the extra 100 and get one made here, well worth it.

The Red · May 6, 2012

Smith Implement in Richmond, Indiana can get you an American made kit. They are still out there. My goal is to keep dollars at home when possible. I might do one or two more in frame overhauls before I leave this earth.

suggestion on rebuild kit

MF165farmer

Member

gene bender

Well-known Member

rustyfarmall

Well-known Member

M Nut

Well-known Member

David G

Well-known Member

El Toro

Well-known Member

teddy52food

Well-known Member

mikeintn

Member

The Red

Well-known Member

Similar threads