Farmall H M 150 Disc plow question

Richardmo · May 5, 2012

We are working on installing a 150 disc plow on a Farmall M if any can help i could use some measurements for the lower hitch that bolts on the tactor it is missing and the how the rod is suppose to be connect to the narrow front of the tractor we have the rod from the plow.
or if anybody has these parts for sale i would be interested and getting these hopefully located in south part of mo.
call 314 954 2599
I am located in Rolla mo.65401

CNKS · May 6, 2012

I can't help you with the measurements because I haven't seen one in over 50 years. I will say that the bracket that takes most of the load is very heavy duty, and that I wouldn't recommend something like angle iron. The arms go straight down with braces angled back about 45 degrees. The plow pulls by a heavy round rod (not pipe) between the arms. I don't believe the actual dimensions are that critical. It pulls from a few inches above the ground, about drawbar height or somewhat lower. Salvage may be your only option. You need salvage yards mainly in S Texas and the south/southeast. The steering attachment is a bracket curved to the rear that bolts to the lower bolster in front of the attachment to the upper bolster. Your H should have those holes, our 47 H did.

Farmall H M 150 Disc plow question

Richardmo

Member

CNKS

Well-known Member

Similar threads