puller/installer for crank pully

Tab Adams · Apr 29, 2012

Is there a puller/installer tool available for the crank pully for a 1948 super A in need of some info on this please need your help!!

Andrew Z · Apr 30, 2012

Yes a clam shell / bearing splitter to remove and just heat and bang it back on. Look in the acrhives there are tons++ of info on this, A, B, Cub, Super C, etc all the same.

Andrew

El Toro · Apr 30, 2012

Here's a puller made by someone that post's on here and has a Cub. Your local metal shop can make one and using allthread using a hydraulic ram or bottle jack. You still need to use a split bearing separator. Hal

sflem849 · Apr 30, 2012

I used a bearing splitter and 2 jaw puller on my WD-9. Looks like the same thing as you only bigger.

puller/installer for crank pully

Tab Adams

New User

Andrew Z

Well-known Member

El Toro

Well-known Member

sflem849

Well-known Member

Similar threads