Will a Super A 90 degree PTO fit a IH 140??

Anonymous-0 · Apr 20, 2012

Will the 90 degree PTO from a Super A fit a IH 140? What would be needed a gasket? And, are they still available? Thank you

Harold H · Apr 20, 2012

The PTO for the Super A and the 140 is the same. Gasket is probably still available from CaseIH.

Harold H

Anonymous-0 · Apr 21, 2012

Thank you

Haas · Apr 21, 2012

If you are getting the belt pulley PTO from a Super A to install on your 140, be sure to get the gear that goes on the tractor shaft. You will need that as well as the belt pulley unit, as if your 140 did not have the belt pulley, most likely there is just a spacer on the shaft where the gear goes. Also, the pulley drive housing uses shims and an O ring as a gasket, because the shims are needed to properly set the gear lash on the right angle drive gears.

Will a Super A 90 degree PTO fit a IH 140??

Anonymous-0

Well-known Member

Harold H

Well-known Member

Anonymous-0

Well-known Member

Haas

Well-known Member

Similar threads