Where can I find a replacement plug (goes into the last valve just before the tower) for my 400? I saw a pic on here a few month ago, but danded if I can find it. Mine is "sloppy" in the hole and I suspect oil is bypassing back down into the tank and not getting to the priority valve. I know there is an "O" ring on it, but the whole thing is loose, not just the ring. If memory serves, they're about 20 bucks or so.
- Thread starter biggerred
- Start date
<a href="http://s140.photobucket.com/albums/r16/Wardner/?action=view¤t=400213.jpg" target="_blank">
![400213.jpg" border="0" alt="Photobucket](https://i140.photobucket.com/albums/r16/Wardner/400213.jpg" border="0" alt="Photobucket)
</a>
I had to pay $30+ and shipping on eBay for this one. I was thinking of giving it to a machine shop and having them crank out a few dozen.
You can also tap the manifold/steering post for a pipe thread and plug it with a recessed 1/4" NPT plug. D Slater offered this suggestion last year.
I think all you need is a new O-ring on the plug or existing valve or both if you can't tell where the failure is.
I had to pay $30+ and shipping on eBay for this one. I was thinking of giving it to a machine shop and having them crank out a few dozen.
You can also tap the manifold/steering post for a pipe thread and plug it with a recessed 1/4" NPT plug. D Slater offered this suggestion last year.
I think all you need is a new O-ring on the plug or existing valve or both if you can't tell where the failure is.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy