Please help identify these Farmall Cultivator parts

DeanOlson · Apr 16, 2012

I picked these up with a Farmall SC. The configuration is not the
same as my SC cultivator set up and they are not in the books I
have.

I suspect that they are for a SA or Cub?

Thanks in advance

Jim Becker · Apr 16, 2012

Looks to me like you may have some mix n' match on different tool bars for a C/Super C cultivator. I don't think I've ever seen long tool bars with the second bend like that. I suspect a user modification.

Tom Fleming · Apr 16, 2012

I will go on record that they are NOT for a Cub. I have a full set of cultivators for mine, and they look nothing like those except for the duck foot sweeps/shovels. I personally have not owned cultivator's for an A, B, or C, so I cannot comment there.

gene bender · Apr 16, 2012

They did make different tool bars for the cultivator some owners manuals have more info than others as many different types of tooling was available rolling rotary type stuff disc hillers bean stuff potatoe hillers and the list goes on they even had a veggie cult that would do many rows depending on row spacing like up to 6 on 15in rows completely different tool bars and shank holders.

LMack · Apr 17, 2012

This was not a set for a one row Cub, A, or SA. I never have seen a set just like this but there is no reason it would not work just fine. The set is reversed in the picture with the left row on the right and the right row on the left. The same or similar tool bars were also used on certain H and M frames. Without a picture or diagram from a manual I would tend to think it was an early version of the typical frame set that is more common C, H, and M frames. It does not look like an owner modification as the bend on the long inside bar is too short.

Please help identify these Farmall Cultivator parts

DeanOlson

Member

Jim Becker

Well-known Member

Tom Fleming

Well-known Member

gene bender

Well-known Member

LMack

Member

Similar threads