Super C axle

Larry Hardesty · Apr 8, 2012

I am thinking of changing the axle on one side of my 1951 Super C. One side was broke some time ago and replaced with a shorter axle. I would like both to be the same size. I have a replacement axle. Any trick to replacing the axle? Is it a matter of pulling the old one out and inserting the new one....or is there something inside I have to do?

Thanks in advance.

CNKS · Apr 8, 2012

You have to slide it out of the bull gear. Some work thru the PTO hole, easier to remove the trans/diff cover.

Wayne in MN · Apr 8, 2012

Why not just cut off the old one?

uncle henry · Apr 8, 2012

pull trans cover and if i remember right two bolts holds it in place inside the trans

Jim Becker · Apr 8, 2012

(quoted from post at 14:33:20 04/08/12) Why not just cut off the old one?

e could try that, but maybe it will still be too short.

He never said whether he is replacing the short one or the long one.

Larry Hardesty · Apr 8, 2012

So how heavy is the transmission cover? Looks pretty heavy to me. It is more than a one person operation to remove it??

Thanks

Larry

Owen Aaland · Apr 9, 2012

(quoted from post at 15:49:57 04/08/12) pull trans cover and if i remember right two bolts holds it in place inside the trans

Two bolts on the original axles. A snap ring is used on the later replacement axles.

Super C axle

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

Larry Hardesty

Member

CNKS

Well-known Member

Wayne in MN

Well-known Member

uncle henry

Member

Jim Becker

Well-known Member

Larry Hardesty

Member

Owen Aaland

Well-known Member

Similar threads