(800) 853-2651
SHOP NOW

Free Plow for A

A

Anonymous-0

Well-known Member
I've a single bottom, drawbar mounted plow, w/coulter for a Farmall A or Super A. The plow has some rust, but is in good condition. I don't have the lifting lever or other mounting hardware.

I will give this plow away for free if you pick it up. NO Shipping! I am located in Jackson County, KY.
 
(quoted from post at 06:06:01 04/05/12) I've a single bottom, drawbar mounted plow, w/coulter for a Farmall A or Super A. The plow has some rust, but is in good condition. I don't have the lifting lever or other mounting hardware.

I will give this plow away for free if you pick it up. NO Shipping! I am located in Jackson County, KY.
Click to expand...

If someone takes you up on that and needs the draft link that runs from the touch control to the draw bar, I reproduce them.
 
Plow for the A didnt use the drawbar but the SA did. I had one for the A and it used a lever mounted on the platform for lifting as the SA mounted to the reversed drawbar and used the rockshaft for lifting.. The A had a depth lever on the bell housing for setting plow depth.
 
I have been looking for this plow for a while. I live in NJ and it is very hard to find here. It would definitely not be a problem going to KY for a pickup. Please contact me as soon as possible via e-mail to discuss details. I would be happy to give you my phone number or call you.
 
Here's a picture of that plow on a Farmall A I restored in 1975-1976. It had a lot of brackets on the plow to mount the plow on the tractor. I think I had to reverse the drawbar. You can see the tall lever on the tractor for raising and lowering the plow. The other lever tilted the plow point. It really plowed nice. I didn't have any fluid in the rear tires and it made the tires slip a little when in sod. Hal
a66714.jpg
 
I have the lifting lever ,the depth lever and part of the rockshaft assy with the handle used for leveling the bottom
 
You must log in or register to reply here.

Similar threads

D
2C-F21 sickle bar mower parts for Super C
Replies
11
Views
525
Don Mountain
D
L
$500 for a Farmall M head gasket set???
Replies
17
Views
1K
Dave H (MI)
D
L
2 Bottom mounted Plow for an A Tractor
Replies
10
Views
1K
HFP
HFP
L
Looking for a JD B or A
2
Replies
21
Views
1K
Keith Molden
K
3
Fast hitch 2 bottom plow
Replies
11
Views
1K
gab
G
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top