For the last couple of weeks I've been serious about getting my Super A running again. It had been sitting in my grandparents barn for quite some time, the last time it ran was probably 10 years ago.
Anyway, this weekend I installed a new wiring harness, voltage regulator,
ammeter, light switch, coil and fuse holder. A couple of years ago I installed new plugs, points, condensor, and wires. I had the generator checked at a local shop and it's working as it should.
The engine will turn over, but I'm not getting any fire at the plugs.
I have triple checked the wiring harness, and I'm fairly confident I installed it correctly.
Any suggestions?
Thanks in advance.
Anyway, this weekend I installed a new wiring harness, voltage regulator,
ammeter, light switch, coil and fuse holder. A couple of years ago I installed new plugs, points, condensor, and wires. I had the generator checked at a local shop and it's working as it should.
The engine will turn over, but I'm not getting any fire at the plugs.
I have triple checked the wiring harness, and I'm fairly confident I installed it correctly.
Any suggestions?
Thanks in advance.