Super C aux. hyd. need

Carl from nebraska · Mar 24, 2012

I have a chance to buy a IH sickle mower off an H. It has a hyd. cylinder lift on the mower. My C has no way to attach. How can I tap into my hyd. system to attach hose from mower? thanks, carl

CNKS · Mar 24, 2012

Assuming rear mount: You need the block that fits between the hyd pipes and the reservoir and a valve that you can mount on the light bar along with some hoses. I assume it was attached to the H U drawbar. The same drawbar will bolt onto the C. If front mount someone else can explain it.

Carl from nebraska · Mar 25, 2012

Thanks CNKS. You're right about the U Bar as is rear mount.

mkirsch · Mar 25, 2012

The block you need is commonly referred to as a "bypass block." There's a gentleman that used to marke and sell them on ebay, but he doesn't have any on there right now.

IH fan · Mar 25, 2012

If you have a Super C, I'd check salvage yards for a SC/200/230 for the valves and lines for a the Fast Hitch and install them along with a set of disconnects. I know there are some big salvage yards in Nebraska, because I contacted them when looking for parts for my 240U. BTW, a 240 system is a little different than the SC and may not work.

Pete7 · Mar 25, 2012

Here"s a link to a by-pass block on ebay that fits a Super C if it does not have a Fast Hitch.
by pass block

Super C aux. hyd. need

Carl from nebraska

New User

CNKS

Well-known Member

Carl from nebraska

New User

mkirsch

Well-known Member

IH fan

Well-known Member

Pete7

Member

Similar threads