c-153 what does it fit.

steve in wi · Mar 21, 2012

I have a in 225 sp haybine,thinking about parting it out. What tractor does a c-153 go into.runs good tried selling with no luck.with lever steer not much interest in the haybine

Anonymous-0 · Mar 21, 2012

That block was used on combines and will bolt up to an A, B, or C. You have to drill the end of the crank for a pilot bearing and change out a few minor bits.

Janicholson · Mar 21, 2012

The engine is often sought after as a hotrod adaptation for Farmall A-B-C-1XX-2XX-and 330-340 series. It is not a sleeved engine and as such needs boring and oversize pistons for rebuilding.
When from a swather or stationary application, they usually need a pilot bearing counterbore in the crankshaft to work with a clutch. Jim

mkirsch · Mar 22, 2012

C153 fits a 504 "naturally" but will fit many other models listed above.

c-153 what does it fit.

steve in wi

Member

Anonymous-0

Well-known Member

Janicholson

Well-known Member

mkirsch

Well-known Member

Similar threads