(800) 853-2651
SHOP NOW

More on the Farmall 400

A

agonair

Member
First, thanks to all who responded to earlier comment concerning a Farmall 400.

I stopped today and gave it a closer look.

SN - 17730. That is all I can make out. Everything else is gone.

On the right side of the motor I found this number stamped...not cast, but stamped - 152787.

It has no belt pulley and three hydraulic remotes. It has new metal emblems but does not have "McCormick" nor do I find the holes where the MCcormick plate should be mounted.

Any further thoughts?
 
Most times the stamped numbers and letters is all thats left to see on those serial plates.
Mccormick emblem goes above the farmall. should be 3 mounting holes.
Without looking the information up I would say thats probably the original engine serial #. C-264 engine serial numbers started with the SM. SW tractors and continued through SMTA and 400 series. Engine numbers were up a good bit into 6 digits when 400 tractors started. Off the top of head, think I remember it was 136xxx or so.
Unless its a professional paint job a 400 is not the highest price seller around.
 
You must log in or register to reply here.

Similar threads

K
Brought Home an F20
Replies
16
Views
1K
Ken Christopherson
K
P
More on the Farmall 450 electrical problem
Replies
7
Views
1K
Owen Aaland
O
T
Found this on the Dain
Replies
7
Views
3K
kj(seil)
K
T
Removing transmission cover on Farmall SH
Replies
8
Views
1K
neblinc
N
W
How To Buy That First Homestead Tractor
Replies
1
Views
869
Anonymous-0
A
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top