350 RC Tires

1sarge

Member
Location
NE Mississippi
Looking for a set of used tires for my 350 row crop. It has 12.4X38 on it now and they are shot. I found some 15.5X38, but are these too big for my 350?
 
(quoted from post at 12:22:23 03/14/12) Looking for a set of used tires for my 350 row crop. It has 12.4X38 on it now and they are shot. I found some 15.5X38, but are these too big for my 350?

The 15.5s are bigger than you need, but more important is the fact your rims are too narrow for those 15.5s.
 
I also have 13.6-38's on my 350 and like the way it looks. Not too big, not too small. Anything larger might start looking a little awkward on the rather small chassis in my opinion.
 
I don't think so. I'm getting ready to put a set of 15.5x38" on my 300. Outside diameter is about an 1" bigger that the rotten 12.4x38's I have now. Just a little wider. I found a set mounted on 14" rims cheaper than I can buy new 12.4 or 13.6x38" tires and tubes.
 
The only difference between 13.6x38 and 15.5x38 is width. They are the same outer diameter.

However if you try to put 15.5's on a 11" or 12" rim they will bulge out and not work very well. You need 14" rims.

The beauty of the situation is, the 350 uses standard double-bevel rims which are widely available in widths up to 30" or so. Not cheap, though.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top