CLUTCH ON SC

RICK IN VERMONT · Mar 12, 2012

I HAVE TO REPLACE THE CLUTCH ON MY SUPER C. I'VE NEVER DONE ONE BEFORE. DOES ANYONE HAVE ANY SUGGESTIONS OR GOOD INSTRUCTIONS I CAN HAVE.
THANKS - RICK

Andrew Z · Mar 12, 2012

It is not really hard, but you should get a set of manuals they will be the most help.

Andrew

Janicholson · Mar 12, 2012

If narrow front, make splitting stands that are at least 3-1/2' wide to handle the bolster and support the rear of the engine. If wide front wedging the axle with hardwood or metal wedges to prevent tipping will work, but do not jack directly on the oil pan. Support the rear of the tractor with wooden blocking, not cement blocks. A manual is a good idea if you are not a seasoned mechanic. The components are heavy and unsafe if allowed to tip over. Jim

CLUTCH ON SC

RICK IN VERMONT

Member

Andrew Z

Well-known Member

Janicholson

Well-known Member

Similar threads