Removing PTO on an A - another question

Charlie M · Mar 9, 2012

I've got the belt pulley assemble off the tractor and all the bolts out of the PTO. Assembly is loose but doesn't want to pull out. Am I missing something? I found the fender bolt that bolts to the assembly.I'm trying to avoid my typical approach which is to break something instead of asking first.

Dennis K (WA) · Mar 9, 2012

As I remember, there are a couple of dowels at the mounting surface. Sometimes they are fairly tight. Don't let the housing get cocked or you may break the flange at the dowls.
Sometimes driving a thin screw driver in the groove near the dowels will get it started. Take some care with it
Good Luck
Dennis

Dennis K (WA) · Mar 9, 2012

I may have misunderstood your post. I took it as the bolts were out but the PTO was still tight to the transmission case. If this is not so, then please disregard. sorry
Dennis

CharlieNJ · Mar 9, 2012

Charlie, look to see if you have all the bolts out. There is one bolt at the 6 o'clock position that might be missed.

Removing PTO on an A - another question

Charlie M

Well-known Member

Dennis K (WA)

Member

Dennis K (WA)

Member

CharlieNJ

Member

Similar threads