(800) 853-2651
SHOP NOW

IH distributor (M) CORRECT stud that passes thru base???

M

mike1972chev

Well-known Member
Hey,Me again,

Am putting an order together for parts and anm NOT near my tractor.

I have an IH made distributor,horizontal. I see on Stiener's and Kuhn's they BOTH offer 2 different studs that pass thru the distributor base,but they BOTH say " Delco,and SOME IH ???" One says its .300 in diameter,the other.375

Which one is correct for a Factory IH made distributor?
 
If you're talking about the electrical terminal stud, IH 353907R1/STP IHS988 is what you want for the IH distributor. I don't know the size/tpi count offhand of the stud.

The inner insulator/anchor is: IH 353906R1/STP IHS974.
The outer insulating washer is: IH 251538R1/STP IHS1294

All parts listed should still be available from CIH.

There are 2 different Delco Remy ignition unit terminal studs available. The stud sizes for these are different. From STP they come with the insulators/nuts/washers as a package. The IH replacement one from STP for some reason does not and the pieces must be purchased seperately.

AG
 
(quoted from post at 14:28:36 03/08/12) Hey,Me again,

Am putting an order together for parts and anm NOT near my tractor.

I have an IH made distributor,horizontal. I see on Stiener's and Kuhn's they BOTH offer 2 different studs that pass thru the distributor base,but they BOTH say " Delco,and SOME IH ???" One says its .300 in diameter,the other.375

Which one is correct for a Factory IH made distributor?
Click to expand...

The Steiner unit for the IH dist works fine.
 
You must log in or register to reply here.
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top