M fast hitch

Al in Mn · Mar 2, 2012

In the last issue of the Red Power magazine there was a picture of an M with a fast hitch using some brackets made by M&W. I had never heard of this, is there anyone who would know where a set would be availabe or a pattern for making some?

DeltaRed · Mar 2, 2012

I had never seen or heard of them either.I,m sure some one handy with 'iron'could easily make the brackets.

mike1972chev · Mar 3, 2012

There are photos somewhere on here that have some nice axle brackets that were made to mount it.

Just put M fast hitch in the "search" up in the right corner.

sflem849 · Mar 3, 2012

Page 55 in the upper right hand corner of the March-April 2012 magazine.

D Slater · Mar 3, 2012

That type fast hitch is more complicated to mount than the one with traction control. It requires support brackets ahead of the axle, to rear of axle and plate made up to mount the piece to the top cover. Sorry don't know where to find. For the other type hitch it just takes 2 plates and the front bracket mounts where the swinging drawbar support did. I made these for a SH, just took some time to figure out where to drill the holes then cut plates out free hand and grind smooth and to fit. But I have more time than money these days.

Al in Mn · Mar 3, 2012

Thank you for your replies

Farmall Nut · Mar 3, 2012

(reply to post at 13:17:00 03/03/12)

ttps://ytforums.ytmag.com/photos/6241.jpg[/img]

[/img]

farmhand · Mar 4, 2012

Al I have a set I took off a tractor several years ago hanging in the shop. I to did not know what they went to but keep them all the same.

Al in Mn · Mar 4, 2012

Farmahand would you be willing to sell the brackets? My cell # is 507-351-9733

M fast hitch

Al in Mn

Member

DeltaRed

Well-known Member

mike1972chev

Well-known Member

sflem849

Well-known Member

D Slater

Well-known Member

Al in Mn

Member

Farmall Nut

Member

farmhand

Member

Al in Mn

Member

Similar threads