806 clutch pedal

jdetig1 · Feb 29, 2012

I put a 856 platform on my 806 and was wondering how far the clutch pedal should travel from all the way up to all the way down. I dont know if its the same, since i had an ice cream box cab platform on it. The 856 platform is angled up in the front. Should the pedal just go down until it hits the platform? I will have to weld a small piece for the pedal to stop so i was just wondering how important it was.
Thanks

Janicholson · Feb 29, 2012

The pedal needs about an inch and a quarter free play to assure Throwout bearing retraction from fingers. Position the pedal so it feels correct on your foot (stop placement), then set free play.
Jim

806 clutch pedal

jdetig1

Member

Janicholson

Well-known Member

Similar threads