I bought a international 460 high utility a few years ago and haven't done much with it until now. I am having trouble with the steeering box. When I turn the wheel back and forth, I can see the steering wheel and shaft move up and down about an inch before it actually begins to move the steering arms. There must be something worn or loose inside. I was hoping someone out there may have had the same problem and could "steer" me in the right direction. Any help would be appreciated.
- Thread starter 53H
- Start date
Anonymous-0
Well-known Member
Sounds like shaft nut is loose next to steering valve, should not move that much. Had a 460 diesel with D301 from a 715 in it, steering wheel would move up and down maybe 1/4 inch, worked OK.
Janicholson
Well-known Member
if power steering it should move about .2 inches.
If manual not at all. Parts are hard to find, and must be NOS. If it turns out to be unfixable, Jackson Power Steering can make it better than new. Jim
If manual not at all. Parts are hard to find, and must be NOS. If it turns out to be unfixable, Jackson Power Steering can make it better than new. Jim
Mark Albers
New User
You don't say wether you have power steering or not. I have a '59 460 utility with manual steering and a loader so the steering has a lot of slop in it at every component. I contacted Jackson Power Steering to see if they have a conversion unit for it and they do not. So it seems that finding NOS parts or machine shop work are my only options.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy