super h pto delete plate

ajdeereman · Feb 18, 2012

I am looking for the pto delete plate that goes on a super h. Does anyone no were i can find one.

Zachary Hoyt · Feb 18, 2012

You can cut one out and drill the holes yourself if you can't find one, I believe they were just a flat plate.
Zach

rustred · Feb 18, 2012

very easy to build one , if one cant be found.

ajdeereman · Feb 18, 2012

I thought they had a hump in the middle like the steering bolster cover

Zachary Hoyt · Feb 18, 2012

Picture in my parts list looks flat and there is nothing there that would make it have to have a hump.
Zach

Owen Aaland · Feb 18, 2012

The original plate was flat but I think the steering cover will fit.

Janicholson · Feb 18, 2012

Nothing to be bulged out for. Flat it is.
Make a gasket out of thick tagboard and have one cut out with a plasma torch (1/4" plate). Place the gasket on the new plate and centerpunch the hole locations. Drill, use #2 permatex on both sides of the gasket, and bolt it in place. Jim

ajdeereman · Feb 18, 2012

steering cover is to big i already tryed that. Thanks for the info

mike1972chev · Feb 18, 2012

I think the "steering cover trick" only works on the Ms and W 6s ????

super h pto delete plate

ajdeereman

Member

Zachary Hoyt

Well-known Member

rustred

Well-known Member

ajdeereman

Member

Zachary Hoyt

Well-known Member

Owen Aaland

Well-known Member

Janicholson

Well-known Member

ajdeereman

Member

mike1972chev

Well-known Member

Similar threads