(800) 853-2651
SHOP NOW

International 3800 Industrial backhoe / loader

A

Anonymous-0

Well-known Member
I am looking for an avenue to get parts for my International 3800D Industrial Backhoe. I need a water pump, fan blade assmbly, seperate from the water pump. I think the fan blade assembly was used on other tractors like this one. I also need the steel cover for the hood that covers the air filter assembly. I am also looking for another steel plate that goes down by the starter / block heater. Any help in letting me know where I can start to find these items will be greatly appreciated. I know ther are alot of IH guys out ther that have more experience than I do. I also am looking for a IH emblem for the front grill. This tractor runs great it is a 6 cylinder diesel wiht glow plugs. Thanks Brad
 
This was strictly a IH CE dealer tractor, now owned by Kumatso/Dresser, only dealers were usually in larger cities, not many AG or MT dealers had this contract. It might use some common parts in chassis, parts were restricted by contract, not any dealer could get them even if they were say a AG IH dealer. I am going to quess it was made by Hough from components made by IH at other plants such as engines from Melrose, trans from Farmall.
 
Thanks for the background information on the industrial international machines. This International runs great with only 1200 hours on the meter. I have a little radiator fluid coming from the water pump and will need a replacment soon before much more work is done. Thanks again for the reply.
Brad
 
As far as the parts you asked for I would call a Komatsu dealer & ask for the part numbers, then check with a knowledgeable salvage dealer such as Worthington in the midwest or a CNH dealer, the CNH dealers can tell you what other IH products used these parts, the hood cover & starter plate might be odd, however the fan & water pump would be fairly common I believe.
 

I also have a International 3800 Loader Backhoe and would be interested in communicating directly and comparing notes.

5954.jpg
 
Water pump and fan should be fairly easy to find. The should be the same a 560 or possibly an early 706. Your engine is either a D282 or or D301.
 
You must log in or register to reply here.

Similar threads

P
International 2500B loader backhoe
Replies
4
Views
275
PineRiverPat
P
M
Massey 222 or 54 backhoe measurements…..
Replies
0
Views
82
Mysteree11
M
M
Massey Ferguson 50A backhoe top mount help?
Replies
4
Views
245
Mysteree11
M
M
Help identifying my Massey industrial!!!
Replies
1
Views
292
Mysteree11
M
M
Massey 50A owners? I need a few measurements off your tractor
Replies
0
Views
115
Mysteree11
M
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top