C wide front installation

Anonymous-0 · Feb 8, 2012

I have a C with a narrow front..Is there any modification needed to put on a wide front? thanks..

ScottyHOMeY · Feb 8, 2012

No modification if you've got all the parts for your wide front.

If so, it's a pretty simple swap out. A look at a parts catalog will be useful to you. The axle tube will mount to the chassis. The steering arm that will drive the tie rods to both sides will bolt in place of the current S/NFE pedestal.

LMack · Feb 9, 2012

You can place a jack under the torque tube on the flat under the clutch. The one we had required that we move the tires and rims over every time we changed it out. If this is true for you, remove the four nuts that hold on the front spindle first then change the tires over to the wide axel hubs. No heavy lifting will then be necessary. I did it by my self even when I was 14.

C wide front installation

Anonymous-0

Well-known Member

ScottyHOMeY

Well-known Member

LMack

Member

Similar threads