h and m stuff

mike in mo · Feb 5, 2012

will the loader for a M fit on a H ?

GeneMO · Feb 5, 2012

I guess it would depend on the brand and model of the loader.

You talking about those old IH loaders? I think it was a #33 maybe?

I have one we always used on our M. Haven't used it for 8 or 9 years, but it would still work I guess. I think it could be made to work on an H.

Someone might have a manual if you give us the loader make.

Gene

old · Feb 5, 2012

The M is both wider and longer then an H so it would depend on if it has universal mounts with it or if your good with a welder

mike in mo · Feb 5, 2012

mccormick loader off farmall m is all the auction said. have never had a farmall

rustyfarmall · Feb 5, 2012

(quoted from post at 10:28:05 02/05/12) will the loader for a M fit on a H ?

The McCormick #30 and #31 loaders are made to fit both the H and the M. A few simple adjustments are required the different widths and lengths.

john d · Feb 5, 2012

Most loaders and other types of mounted equipment will swap from an M to an H with the addition of spacers to make up for the narrower frame width of the H.

rustyfarmall · Feb 5, 2012

(quoted from post at 12:06:02 02/05/12) Most loaders and other types of mounted equipment will swap from an M to an H with the addition of spacers to make up for the narrower frame width of the H.

The spacers are already there on a #30 and a #31. You just reposition them.

h and m stuff

mike in mo

Member

GeneMO

Well-known Member

old

Well-known Member

mike in mo

Member

rustyfarmall

Well-known Member

john d

Well-known Member

rustyfarmall

Well-known Member

Similar threads