lockwasher

Jim Isler · Feb 1, 2012

Got lots of help on this question, including a CNH PART NUMBER 47499DB Two calls to dealers who don't have. Anybody got a dealer I could call?

rustyfarmall · Feb 1, 2012

(quoted from post at 12:01:38 02/01/12) Got lots of help on this question, including a CNH PART NUMBER 47499DB Two calls to dealers who don't have. Anybody got a dealer I could call?

I don't recall what you are working on? Might be a strong chance the 47499B crosses over to a newer part number?

Dachshund · Feb 1, 2012

I just googled the part number and got several "hits".....

rustyfarmall · Feb 1, 2012

O.K., now that I know what you are looking for, have you tried a N.A.P.A. dealer?

rustred · Feb 1, 2012

i would just make those tabs out of sheet metal of the proper thickness. all the engines i have seen with them its not like they do anything. have never found the rod bolt loose and said oohh luckey it had this tab bent on it. using removeable locktite on the threads is probably more effective anyhow.if its torqued its torqued.

Jim Isler · Feb 1, 2012

I called two dealers Google said would carry 'em. One had none, another five. I'm going to follow the others' advice and go with loctite. Thanks guys

mkirsch · Feb 1, 2012

The dealer with none can order you 8 from the warehouse.

The dealer with five can order you three more from the warehouse.

Farmallhal · Feb 1, 2012

Have your dealer contact the Parts Depot as their inventory shows (19) in Wisconsin and (9) in the Tennessee warehouse. Couldn't find a replaced by part no. Hope this helps, Hal.

lockwasher

Jim Isler

Member

rustyfarmall

Well-known Member

Dachshund

Member

rustyfarmall

Well-known Member

rustred

Well-known Member

Jim Isler

Member

mkirsch

Well-known Member

Farmallhal

Well-known Member

Similar threads