Jim Paterson
Member
Sorry, I forgot to post the pic
- Thread starter Jim Paterson
- Start date
Sorry, I forgot to post the pic
Allan in NE
Well-known Member
Sure it will work. Even with the control valve in the circuit, it's doing the same thing anyway.
Only difference will be that now you won't have any pressure; just oil running around in a continous circle.
Oh, and ya can't dump it in the top of the tank. It'll just puke right back out the vent.
Allan
Only difference will be that now you won't have any pressure; just oil running around in a continous circle.
Oh, and ya can't dump it in the top of the tank. It'll just puke right back out the vent.
Allan
Problem with running it in a continuous circle is it will build heat, even with out pressure. Just the pump friction will over time keep the heat building. If you have enough line, it can cool, but you don't want that much line hanging off the tractor. If there is a way to cycle it back through the reservoir it would be better, otherwise in the heat this summer it will get hotter than you'd like.
Sure you can dump it in the top. Just get rid of the vent.
You have to seal off the vent when you add the 2-way christmas tree valve normally.
I would connect the live pump suction to the bottom and dump the output to the fill pipe on top, without a vent. That will eliminate concerns about heat.
You have to seal off the vent when you add the 2-way christmas tree valve normally.
I would connect the live pump suction to the bottom and dump the output to the fill pipe on top, without a vent. That will eliminate concerns about heat.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy