ih 300 utility power steering

my5sons

New User
I just changed all hydraulic fluid and out of what would be the driver side of the tractor fluid started poring out. I removed the starter and there is the two bolts mounting ps to the tractor and in the middle there is a hole. The hole is where the fluid is pumping out. I don't see any threads and contact get a bolt to fit it. If there is anywhere I can get some help its always on this site. Thanks in advance.
 
It is about a knickle sized hole that is supposed to be plugged by a Welch plug (small disk that plugs up casting core holes. Measure it and purchase a new one and install. It is a bit tough to get at6 but doable. Jim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top