240 Farmall hydralics

BBinOk · Jan 24, 2012

I have owned the tractor for about a year.It was brought back from the dead by an older gentelman.He told me he changed the fluid and put a new trans filter in it.I was able to mow with it all summer witch was twice because of the drought. When u lift the 2 pt. u have to feather the lever to make it stop without lugging the motor.When I took the mower off ,now u cant get the 2 pt. to stop without killing the motor and pucking foamy fluid out the breather on top. All help is greatly appreciated in advance. Also checked the filter he said he replaced and it looked old and tornup.

cd1 · Jan 24, 2012

do you have the lever beside the seat with position control? Or do you use a lever to the right of the dash?

BBinOk · Jan 24, 2012

Beside the seat.

cd1 · Jan 24, 2012

I'd take a look at the linkage running from the hydraulic blocks under the dash back to the fast hitch, it should be moving with the fast hitch and controlling the valve under the dash to set the position, I have to think you have something broken or unhooked in that system. The transmission has no filter itself. There is a filter for the hydraulics but it is in with the rest of the stuff under the dash. The transmission and hydraulic oils are separate.

240 Farmall hydralics

BBinOk

Member

cd1

Member

BBinOk

Member

cd1

Member

Similar threads