(800) 853-2651
SHOP NOW

IH 806 steering to left

A

Anonymous-0

Well-known Member
Problem: IH 806 cuts all the way to the left and will not correct. This has happened 4 times. It has been temporarily fixed by replacing the o-ring on the piston in the steering cylinder (it had rolled off the shaft.) That works for about a year and then it happens again. Have also replaced the cylinder sleeve. Would rather fix it for good than keep patching. Any ideas are greatly appreciated!
 
In my opinion the pressure to force the piston to one end and to stay there must come from the valving in the steering wheel driven pump. This proportioning pump has control of the cylinder. If it is hanging up internally it can force full pressure to one end of the steering cylinder. Jim
 
I would agree the problem is in the steering control valve mounted on top of clutch housing. Sticking spool. They need to move very freely and spring centered.
 
Hey, thanks! Figures as those are just about the only parts not replaced. They never showed any sign of malfunction, wear or tear and we were told by our tractor mechanic "Aw, those things never go bad." Will get right on it. Thanks again.
 
You must log in or register to reply here.

Similar threads

S
1952 Farmall Steering Question
2 3
Replies
50
Views
2K
Jim Becker
J
J
Case IH 895 steering issue
Replies
3
Views
208
MARK ROBKE
M
T
Steering Question on a Case-IH 895.
Replies
8
Views
333
Texasmark
T
T
Case-IH 895 steering question.
Replies
15
Views
414
Texasmark
T
G
806 steering issue
Replies
10
Views
621
Gweltzin
G
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top