belley pump houseing

dcpky · Jan 18, 2012

hey guys droped belley pump took off cover removed nut put in new seal I noticed a crack about 3to 4 inches long the houseing the part where the gears are stored its close to a bolt dont no if someone tightend it to much or if water had got in there and froze it up Ive only had tractor for a couple months dont no any history on it should i look for another pump or see what happens thanks for all the help

Zachary Hoyt · Jan 18, 2012

I think I remember that you have an H and if that is so I have a couple of pumps here if you need a pump or parts. I do not know why it would crack, I am not able to picture how it looks in there as it has been too long since I had one apart.
Zach

dcpky · Jan 18, 2012

Zack it is a H where abouts do you live i would be interested in a pump houseing and all Thanks you can email me at [email protected] thanks

pete 23 · Jan 18, 2012

Two ways I have seen them crack. One if cracked in the actual housing containing the gears is from excessive pressure such as shimming the relief valve too high. Other is, if reservoir cracked, filling too full with a load or implement raised and then dropping it fast, poof.

Zachary Hoyt · Jan 18, 2012

I put your address in my email and sent a message but it bounced. You can send me an email by clicking 'send email' on this message and I will reply.
Zach

belley pump houseing

dcpky

Member

Zachary Hoyt

Well-known Member

dcpky

Member

pete 23

Well-known Member

Zachary Hoyt

Well-known Member

Similar threads