(800) 853-2651
SHOP NOW

Will it fit

A

Anonymous-0

Well-known Member
I am looking at a john deere model 46 loader,that was mounted on a 450 farmall.It is in excellent shape and the price is right.Since it was on a 450,will it fit on an H or M or is a 450 longer because of the TA? thanks for your time. Jim
 
It depends on where the loader bolts to the tractor.

Someone "customized" this loader to make it fit the 450. It should fit the M okay, but even if it doesn't, the additional customizations necessary to make it work should be minor.

It may also fit the H, but not without some spacers and/or modifications.

What are you planning on doing about hydraulics? The 46 is a fully hydraulic loader from what I've seen, and has pretty small diameter cylinders. This is good for speed because an M's belly pump does not flow very much, but bad for lifting capacity because the M's belly pump only puts out 800PSI. You can add bigger cylinders but that would cost a fortune.

Also if your M does not have power steering, you will get a heck of a workout if you can steer it at all. The 46 looks like a pretty hefty loader, certainly a far cry from the flimsy pipe loaders that you'd see on an M.
 
(quoted from post at 21:52:09 01/17/12) I am looking at a john deere model 46 loader,that was mounted on a 450 farmall.It is in excellent shape and the price is right.Since it was on a 450,will it fit on an H or M or is a 450 longer because of the TA? thanks for your time. Jim
Click to expand...

The 450 is slightly longer than an M because of the T.A., but basically, if it fit on a 450, it will fit an M, and yes, a few modifications might be in order.

If it will fit an M, it will fit an H.
 
The 46 was the next model after the 45,it has a trip bucket,evidently they were available either way.My H has a live pump. Jim
 
You must log in or register to reply here.

Similar threads

M
Farmall 450 auxiliary hydraulic pto driven pump
Replies
6
Views
322
Jim.ME
J
D
CIH parts site
Replies
9
Views
358
BarnyardEngineering
BarnyardEngineering
M
450 ignition points removal and replacement
Replies
7
Views
326
IHWhitney
I
S
Another M hydraulic question
Replies
2
Views
512
D Slater
D
L
IHC 2001 loader mounting
Replies
7
Views
447
LORENI
L
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top