IH C-200 2 disc plow

53Farmall · Jan 15, 2012

I have an IH C-200 2 disc plow and the disc need to be replaced. These disc measure 22.3 inches with a 3 inch concavity. Does anyone know what these disc should measure or the IH part number

Jim

Handyman · Jan 15, 2012

the little bit of information I have on a 2 disk plow for a C calls for a 26 inch diameter blade and that they are adjustable from a 14 inch to a 20 inch cut.

Farmallhal · Jan 15, 2012

I have parts catalog FC1-2 which lists a C-200 disc plow shown with the 2 point fast hitch showing the disc part no. as PO 12 314. You didn't note if your plow is a F/H model or not but they probably use the same disc. The disc is noted as being 26" dia. and 3/16" thick. They are held to the spindle/hub with (4) 1/2"-13NC bolts 1 1/2" long. Your disc was probably this size when new but has experienced wear from use. Hope this helps, Hal.

504 · Jan 15, 2012

I have found that standard disc blades will fit. I plan to match my old ones up to the new ones and use a plasma cutter to cut the new holes.

IH C-200 2 disc plow

53Farmall

New User

Handyman

Member

Farmallhal

Well-known Member

504

Well-known Member

Similar threads