Farmall H Sleeve

JCR-Michigan · Jan 14, 2012

Hello all-
I am having trouble finding a sleeve for a 1944 Farmall H. I need a stock bore sleeve. I ordered a sleeve from Case-IH, part# 366747R1. When this sleeve cam in, it was a 3.437 bore, not 3.375 like I need. Does anyone know if there is a different part number I should be ordering? Or of anyone who sells just a single sleeve? Thanks for the help.
JCR

rustyfarmall · Jan 14, 2012

(quoted from post at 15:56:34 01/14/12) Hello all-
I am having trouble finding a sleeve for a 1944 Farmall H. I need a stock bore sleeve. I ordered a sleeve from Case-IH, part# 366747R1. When this sleeve cam in, it was a 3.437 bore, not 3.375 like I need. Does anyone know if there is a different part number I should be ordering? Or of anyone who sells just a single sleeve? Thanks for the help.
JCR

Not likely you will find a stock bore sleeve unless it is N.O.S. or a used one.

Janicholson · Jan 14, 2012

LA sleeve will make (or have) a sleeve for it. On line works, but calling them is better. They are not just IH so a call would be my best advice. Jim

Duner Wi · Jan 14, 2012

Sealed Power shows a sleeve for C152 3 3/8 inch Part # SL99M. Description says 3/32 wall, Cut to length , flanged sleeve. Don't know if it will work or not.

D Slater · Jan 14, 2012

IH sleeve # was 8382D, but good luck finding one.

Bill Krosnicki · Jan 14, 2012

(quoted from post at 23:56:34 01/14/12) Hello all-
I am having trouble finding a sleeve for a 1944 Farmall H. I need a stock bore sleeve. I ordered a sleeve from Case-IH, part# 366747R1. When this sleeve cam in, it was a 3.437 bore, not 3.375 like I need. Does anyone know if there is a different part number I should be ordering? Or of anyone who sells just a single sleeve? Thanks for the help.
JCR

I have several used sleeves, I'll check the size of them when I get a chance.
Where in MI are you at?

JCR-Michigan · Jan 15, 2012

Bill-
I am in Hemlock. Are you the Bill I bought the Regular air cleaner from right before Christmas? Either way, if you have a good sleeve that would be great.

John

Bill Krosnicki · Jan 15, 2012

(quoted from post at 14:46:38 01/15/12) Bill-
I am in Hemlock. Are you the Bill I bought the Regular air cleaner from right before Christmas? Either way, if you have a good sleeve that would be great.

John

Hey John, small world! Give me a couple days. I'll give you a call.

F20Puller · Jan 17, 2012

I believe we would have a std bore sleeve if Bill can't fix you up. Alderson Tractor 641-624-2275 8-6 Central Time

Farmall H Sleeve

JCR-Michigan

New User

rustyfarmall

Well-known Member

Janicholson

Well-known Member

Duner Wi

Well-known Member

D Slater

Well-known Member

Bill Krosnicki

Member

JCR-Michigan

New User

Bill Krosnicki

Member

F20Puller

Member

Similar threads