Delco Distributors?

John V · Dec 29, 2011

I have a Delco distributor on an H and I was wondering who would carry a set of points for one, and also does anybody still make plug wires for them that aren't the cut to fit type.

Janicholson · Dec 29, 2011

Check the fit of wires for a Datsun 510. Make sure they are wire core, or wound wire core wires. Carbon wires are not good. WIth the number, the NAPA store will have the points. Jim

Duner Wi · Dec 29, 2011

DR1HV points Neihoff#. Tell parts Person you have a Chevy between 1939 -52. If you prefer tractor points say you have a 1949 Ferguson TO20. Same part # as Chevy car. Delco dist in IH was aftermarket replacement for magneto as I recall.

glennster · Dec 29, 2011

the delco distributor was also used in most all allis chalmers 4 cly, case dc-sc, 200b thu600b tractors, avery, and minneapolis moline 4 cyl tractors. the plug wire sets from any of those should be a pretty close fit too.

gene bender · Dec 30, 2011

Just take the Delco# on the dist along with the used points they will be able to get you new ones.

Nebraska Cowman · Dec 30, 2011

Everybody carries them. See Duner's reply

rustyfarmall · Dec 30, 2011

(quoted from post at 16:14:49 12/29/11) I have a Delco distributor on an H and I was wondering who would carry a set of points for one, and also does anybody still make plug wires for them that aren't the cut to fit type.

I've got the whole tune-up kit for the Delco and I've got the copper core wires. For an extra fee, I'll cut the wires to fit your H.

Delco Distributors?

John V

New User

Janicholson

Well-known Member

Duner Wi

Well-known Member

glennster

Well-known Member

gene bender

Well-known Member

Nebraska Cowman

Well-known Member

rustyfarmall

Well-known Member

Similar threads