Int harvester 4166 4 wd stuckin four(4) wheel steering

Anonymous-0 · Dec 23, 2011

Hi
My 4166 Int harvester 4 wheel drive stuck in four
wheel steering. Levers move but stays 4 wheel steer.
Hard to work with any help advice appreciated.
Thanks
Dewayne

caterpillar guy · Dec 23, 2011

Look under the right side of the tractor . You will have to crawl under, there is a long linkage that goes from the front wheels to the back ones. It is probably bent .

Anonymous-0 · Dec 23, 2011

Thanks for reply.
I will take a hard look at it.

TedinNE · Dec 24, 2011

As Dewayne said, check for the linkage rod for being bent.
Also under the right hand corner of the cab is a link arm with a pin through it. If the pin is sheared it will cause the rod to bend.I am not sure how you were supposed to replace the pin with a cab on. Was able to drill a hole trough the floor and drive in a new pin. If the pin is sheared It will continue to bend the kinkage. Learned this the hard way.

Int harvester 4166 4 wd stuckin four(4) wheel steering

Anonymous-0

Well-known Member

caterpillar guy

Well-known Member

Anonymous-0

Well-known Member

TedinNE

Member

Similar threads