3 p hitch for utility 300

greyfoxxca · Dec 23, 2011

I have a real clean good running 300 utility. It has no hydraulics or pto. I would like to set it up with hydraulics and a regular 3point.
Has anyone done this and is ti worthwhile?

thanks
George

mike paulson · Dec 23, 2011

i have seen 3pt hitch setups that can be added to tractors, so it is out there, cost might be a factor?
someone who knows more will no doubt help you out but they do exist...

Janicholson · Dec 24, 2011

A Saginaw system hitch is a probable reality. The Hydraulics can be constructed with a front mounted pump (through the crank hole) or an engine mounted pump in front of the distributor.
A valve and reservoir will be needed as well as a pressure relief valve. Additional valves should be purchased at the same time to make future add ons easy. Jim

mike paulson · Dec 25, 2011

heres yer bippy....

http://www.saginawcountytractor.com/farmall

3 p hitch for utility 300

greyfoxxca

Member

mike paulson

Member

Janicholson

Well-known Member

mike paulson

Member

Similar threads