Exploded view, front steering bolster for an H?

Yooper Farmall · Dec 19, 2011

My H"s front end seems a little loose. I don"t see anything in the service manual other than a brief menion that there is a bearing. I see an unreadable exploded view on my local CASE-IH web site. Does anyone have a readable exploded view of the bolster?

pile driver · Dec 19, 2011

there are also seals and bushings upper and lower
seals and bearings are redily available but i haven,t had any luck finding bushings, maybe someone out there knows. good luck

Bob M · Dec 19, 2011

Carter and Gruenenwald stocks a bolster rebuild kit for the H thru 350 for $185. Kit includes both bushings, thrust bearing, seals and steering box cover gaskets.

C&G also offers these parts individually.
Carter & Gruenenwald

David G · Dec 19, 2011

Bob M nailed it, I bought the bushings from CNG. You will STILL have slop in the steering if the worm or sector gear is worn. It is non adjustable. Some of the sector gears were full gears so they could be turned over, mine was 1/2 gear.

George Rausch · Dec 19, 2011

I fixed the wobble in my H by grinding off 1/4" of the back of the worm gear, and installing a 1/4" spacer between the worm gear bearing and the gear. This pushed the worm gear 1/4" back, so thicker teeth are in contact with the circle gear. Took all the slop out of the system.
It seems to work perfectly. I've driven on several highways in road gear, and actually forgot about worries about steering. Works in the field too.

CNKS · Dec 19, 2011

The unreadale diagram can be expanded, provided you mean the parts section of caseIH.com.

Exploded view, front steering bolster for an H?

Yooper Farmall

Member

pile driver

New User

Bob M

Well-known Member

David G

Well-known Member

George Rausch

Member

CNKS

Well-known Member

Similar threads