Fast Hitch Plow gauge wheel

Dean Olson · Nov 5, 2011

Anybody have a gauge wheel for this plow they can part with? If not could you please post a picture of yours and size of the wheel so I can fabricate one?

Thanks in advance.

Janicholson · Nov 5, 2011

THe bar that fits in the bracket is sized to fit well in the square hole. It is a J shaped bar of one piece curved back to vertical toward the left (land) side. A spindle is welded to the outside flat of the hook such that when it is all the way up, the spindle is about even with the bottom of the bracket.
The wheel/tire on ours is 16" 6.50X16 IIRC. There were holes in the part of the bar that slides into the bracket to adjust the position of the gauge wheel. When installed the tire touches the unplowed ground at 8 inches above the shares,(to cut 8: deep. The offset in the J as best I remember is about 5 inches outside to outside. Jim

cjgarnett · Dec 15, 2011

Did you find a gauge wheel for your plow?

Fast Hitch Plow gauge wheel

Dean Olson

Well-known Member

Janicholson

Well-known Member

cjgarnett

New User

Similar threads