puttin a 2nd remote on an m

acey · Dec 5, 2011

Is it possible to put a 2nd remote on my M and what"s all needed to do it

rustyfarmall · Dec 5, 2011

(quoted from post at 16:45:08 12/05/11) Is it possible to put a 2nd remote on my M and what"s all needed to do it

You can put as many remotes as you want on an M. You can get remote control control valves with 1, 2, 3, 4, or more valves, and then you'll need hydraulic hoses and hose ends.

Wardner · Dec 6, 2011

</a>

You can put the valve wherever you want. This valve was purchased on eBay for about $75 delivered. Get your hoses and valves via mail order. Should cost 10% to 25% of what the local hydraulics shop wants. Surplus Center, Discount Hydraulics, Northern Tools have good inventory.

Just run the Liftall output into open center valve. Lock the Liftall in the rear position when using the spool valves. Run the valve bank outlet hose back to reservoir.

mkirsch · Dec 6, 2011

You can either replace the valve you have now with a multi-spool valve, or add another valve.

Make sure the valve you get is OPEN CENTER.

The easiest way to connect the new valve is to remove the hose that connects to the IN port of your current valve, and screw it into the IN port on the new valve. Take a new hose and run it from the OUT port of your new valve to the IN port on the original valve.

puttin a 2nd remote on an m

acey

New User

rustyfarmall

Well-known Member

Wardner

Well-known Member

mkirsch

Well-known Member

Similar threads