Farmall c wide front fatory push blade

330 Standard · Dec 5, 2011

I found what appears to be a farmall C with a wide front and a factory push blade assembly. Owner says it is a rare blade/setup. Wide front has 2 rubber bumpers that blade lift arms sit down on. All appears factory and nothing is cobbled up or appears homemade. Any ideas or thoughts as to if this is a rare setup and its worth? Tractor is stuck in gear and motor is disassembled so i do not want to pay too much. Thanks

DeltaRed · Dec 5, 2011

Just buy it and dont be paranoid about "paying too much".$250-$300 is fair-he!! $500 is still ok.Scrap iron price is a place to start(Weighs 25000-3000lbs)I just bought an IH #642 rollover plow(4x16-1970yr.)-pd 1200,its only 'worth' $1000(or less),but its what I wanted so I pd the extra to get it.They';re getting scarce,I probally would'nt find another one.Enjoy your 'new' tractor.

Jim Becker · Dec 5, 2011

The factory wide front for a C has 2 rubber bumpers for the limit stops of the axle pivot. The blade lift arms should be located outside of the rubber bumpers and should not hit the axle. Something is either cobbled or at least mis-assembled.

Farmall c wide front fatory push blade

330 Standard

Member

DeltaRed

Well-known Member

Jim Becker

Well-known Member

Similar threads