IH 826 lost steering, pto, 3 point ,brakes

Jeff Gibson · Nov 29, 2011

Was using the 826 to grind feed Friday, Saturday I went out to bush hog with it and the steering wouldn't work. I tried the PTO and the 3point it doesn't work either. I am getting a loud screeching squalling noise from the tractor also. Any ideas? Started doing some online research and everything points to a stripped clutch disc problem. I haven't pulled any inspection covers yet. The fluid level is fine and the temp has been in the 50's so its flowing fine. Any other ideas? Dont look forward to having to split this tractor.

Thanks
Jeff

Alont · Nov 29, 2011

The hydraulic filters are clean?

Alont

the tractor vet · Nov 29, 2011

What happened is the PTO input shaft along with the spline hub on the pressure plate decided to go to lunch . So now you will have to split the tractor and replace the PTO input shaft and install a new clutch . so you will need (1) 384395 HD 4 or HD 6 clutch disc , your choice here, (1) 405300 PPA (1)830417 bearing and seal kit (1)528676 Input shaft and gear , (1) 830343 bearing.

IH 826 lost steering, pto, 3 point ,brakes

Jeff Gibson

New User

Alont

Member

the tractor vet

Well-known Member

Similar threads